T2 Headlight
T2 Headlight lists 42 W, a 9-32 V working-voltage range and IP67 protection. Before ordering a lamp, confirm its part number, connector, mounting dimensions, side and beam requirements. These specifications do not establish vehicle fitment or road approval.
Vehicle compatibility — verify before ordering
The previously listed multi-brand vehicle compatibility table has been removed because fitment has not been verified for this specific headlight. No Audi, BYD, Mercedes-Benz, Volkswagen, BMW or other vehicle application is confirmed on this page.
Before ordering, send the existing lamp’s OEM or supplier part number, front and rear photos, connector and pinout photos, mounting dimensions, left/right side, vehicle model and year, and the destination country’s lighting requirements. Our team should confirm the physical fitment and electrical match in writing before a quotation or bulk order. The published 42 W, IP67 and 9–32 V figures describe the listed product specification; they do not prove vehicle compatibility or local road approval.
Specification
| Power | 42W |
| Input | 3.5A |
| Material | Aviation Aluminium |
| Protective Class | IP67 |
| Working Voltage | 9-32V |
| Color Temperature | 6500K |
| Working Temperature | -40℃~+80℃ |
| Luminous flux | 4200LM |
FAQ
T2 Headlight: verify electrical and mechanical fitment
T2 Headlight is a lamp product, not a complete vehicle. Its specification lists 42 W power, 3.5 A input, a 9-32 V working-voltage range, 6500 K color temperature and 4200 LM luminous flux. The housing material is described as aviation aluminium, with an IP67 protective-class entry and a working-temperature range of -40 to +80 degrees Celsius. Treat these as catalogue values requiring confirmation for the supplied part, not proof that it fits a named vehicle.
Electrical matching goes beyond a voltage range
Ask at which supply voltage the 3.5 A input was measured and whether the 42 W rating applies to one lamp, a pair or a particular operating mode. A 9-32 V label does not establish connector compatibility, polarity, pin assignments, control electronics or behavior with the vehicle’s lamp-monitoring system. Send clear connector photographs and the original lamp’s part number. Where relevant, request a wiring diagram and confirmation of any separate driver or adapter required; do not assume those items are included.
Specify the installation and beam requirement
Mounting points, housing depth, lens outline and left/right orientation determine whether a lamp can physically replace the existing assembly. Give the vehicle year and version, installation measurements and front/rear photos of the old lamp. If the lamp is intended for road use, the beam function and pattern must match the destination’s requirements, including the relevant traffic direction. The listing does not confirm an OEM application, an approval mark or a road-lighting certificate. IP67 and color temperature are not substitutes for those checks.
Evaluate a sample before a bulk replacement order
Request a sample matching the proposed production part and test mounting, electrical operation, beam behavior and any dashboard warnings before ordering a large batch. Agree on whether the quote covers a single side or a set, the part number, included accessories, protective packing and replacement terms. Ask for evidence supporting the published ingress-protection and light-output claims where these are purchasing requirements; no test certificate is supplied by this page.
Use the parts inquiry form for a fitment request and browse Auto Parts for adjacent products. Lighting-related approval background is available through UNECE’s vehicle-regulation resources. The International Transport Forum offers wider road-transport context, not certification of this headlight.
